Copper Moonshine Still

Autonomous cooling system for moonshine still

Autonomous cooling system for moonshine still
Autonomous cooling system for moonshine still
Autonomous cooling system for moonshine still
Autonomous cooling system for moonshine still

Autonomous cooling system for moonshine still   Autonomous cooling system for moonshine still

The autonomous cooling system of the moonshine apparatus is used in the absence of running water, water supply, it is possible to use the autonomous cooling system in a garage, office, non-residential premises, as well as for the purpose of saving, when the use of water at the meter is too expensive. In the cold season, the cooling system of the moonshine apparatus allows you to heat the room.

If the cooling system is installed in a hot room, the condenser can be installed on the street (shadow side) by analogy with the outdoor unit of the air conditioner. In any case, the use of autonomous cooling is convenient and economically justified. It is important to notice that in our autonomous cooling system for the moonshine machine, a temperature sensor is installed, which measures the temperature of the water at the outlet of the dephlegmator, after which it turns on the cooling fan, when the temperature drops below the set point by one degree, the fan will automatically turn off, which allows you to maintain a constant water temperature at get out of the dephlegmator. With the help of the controller, you can adjust the water supply speed (pump performance) and turn the cooling fan.

There are four models of autonomous cooling systems, they have different power, the power of the system is determined by how many KW of heating power supplied, it is able to dispose of. The autonomous cooling system utilizes 4,500 W of heat at an ambient temperature of 23 degrees. The main difference between autonomous cooling systems is the size of the cooling radiator. The operation of the system depends on the air temperature in the room, if the distillation process takes place in a cool place, then the water, passing through the copper cooling circuit, cools down by itself, and the fan can be turned off, both manually and in automatic mode. Large containers are often used as a container for water, later, if the water is not changed, the water can spoil, to avoid this, "heads" are added to the container, in this case, by filling the water once, you can forget about it for several years.

In autonomous cooling systems, it is possible to adjust the water supply speed using the engine speed regulator. The container is not included.

Autonomous cooling system of the moonshine apparatus - 1 pc.


Autonomous cooling system for moonshine still   Autonomous cooling system for moonshine still